INSTRUCTIONS FOR THE STANDARD RANGE OF SABERS
Press and hold the LED button to wake the saber from sleep mode. A "power on" audio clip will play to confirm that the saber is awake. To activate the saber, press the activation button again.
The following table provides a list of commands you can activate using the saber. Some sabers with lit activation switches will flash every second while held. However, some sabers do not have an illuminated activation switch. Instead of counting LED flashes, count in seconds.
While the blade is ON:
|
Control
|
Effect
|
Additional Info
|
|
Press button
|
Blaster deflect
|
Â
|
|
Hold for 1 LED flash / 1 second
|
Drag effect
|
Press button once to end drag effect
|
|
Hold for 2 LED flashes / 2 seconds
|
Activate color change
|
As colors change, press button again to lock color
|
|
Hold for 3 LED flashes / 3 seconds
|
Activate quick color change
|
As colors change, press button again to lock color
|
|
Hold for 4 LED flashes / 4 seconds
|
Deactivate saber blade
|
Saber will return to wake state
|
Â
While the blade is OFF (wake mode):
|
Control
|
Effect
|
Additional Info
|
|
Press button
|
Activate saber
|
Â
|
|
Hold for 1 LED flash / 1 second
|
Volume adjust
|
Can be set to high, low or mute
|
|
Hold for 2 LED flashes / 2 seconds
|
Blade effect
|
Can be set to stable, unstable or pulse
|
|
Hold for 3 LED flashes / 3 seconds
|
Motion control toggle
|
Enable or disable motion controls. Does not change font selection on twist
|
|
Hold for 4 LED flashes / 4 seconds
|
Flash-on-clash toggle
|
Enables or disables impact effect
|
|
Hold for 5 LED flashes / 5 seconds
|
Sound font change
|
Select the next sound font
|
|
Quick saber twist (held vertically)
|
Sound font change
|
Alternate method to select the next sound font
|
|
Hold for 10 seconds
|
Sleep mode
|
The saber will sleep automatically if left idle for 10 minutes
|
Â
